Loading

Configure the parameters of your services

Magicians and mentalists can configure here their tricks at the precision of one second:
... make multiple phones ring with makering+ during 1 to 30 seconds.
... make two phones call each other with makecall sequentially or simultaneously.
... make one phone send an SMS with makesms+ without the second SMS sent 5 minutes later.

Do not change the parameters if you are not sure of the effect. Use the standard (Std) values in case of doubt.

Do not forget to save the configuration after having modified the parameters.

makering

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKERING_DELAY = MAKERING_DELAY_CONF + MAKERING_DELAY_FORM

An additional delay NETWORK is depending on the location of the phone receiving the call and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

You can select the maximum duration of the ring with the parameter MAKERING_RING_MAX.

makering_timing
Parameters (in seconds)MinStdMaxValue
MAKERING_DELAY_CONF0059
MAKERING_RING_MAX12030
makering+

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKERING+_DELAY = MAKERING+_DELAY_CONF + MAKERING+_DELAY_FORM

An additional delay NETWORK_A, NETWORK_B, NETWORK_C, NETWORK_... is depending on the location of each phone receiving the call and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

You can select the maximum duration of the ring with the parameter MAKERING+_RING_MAX.

makering+_timing
Parameters (in seconds)MinStdMaxValue
MAKERING+_DELAY_CONF0059
MAKERING+_RING_MAX12030
makeringun

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKERINGUN_DELAY = MAKERINGUN_DELAY_CONF + MAKERINGUN_DELAY_FORM

An additional delay NETWORK_A, NETWORK_B, NETWORK_C, NETWORK_... is depending on the location of each phone receiving the call and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

You can select the maximum duration of the ring with the parameter MAKERINGUN_RING_MAX.

makeringun_timing
Parameters (in seconds)MinStdMaxValue
MAKERINGUN_DELAY_CONF0059
MAKERINGUN_RING_MAX12020
makecall

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKECALL_DELAY = MAKECALL_DELAY_CONF + MAKECALL_DELAY_FORM

An additional delay NETWORK_A, NETWORK_B is depending on the location of the phone receiving the call and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

You can select the maximum duration of the ring with the parameter MAKECALL_RING_MAX_A, MAKECALL_RING_MAX_B.

You can select the maximum duration of the conversation with the parameter MAKECALL_SPEAK_MAX_A, MAKECALL_SPEAK_MAX_B.

There are 2 types of makecall, either sequential or simultaneous. The sequential one is trigerring the call to the second phone after the first phone has picked up. The simultaneous one is trigerring both calls at same time.


Sequential makecall

makecall_sequential_timing

Simultaneuous makecall

makecall_simultaneous_timing
Parameters (in seconds)MinStdMaxValue
MAKECALL_DELAY_CONF0059
MAKECALL_RING_MAX_A13030
MAKECALL_RING_MAX_B13030
MAKECALL_SPEAK_MAX_A15959
MAKECALL_SPEAK_MAX_B15959
MAKECALL_STOP_DELAY0059

You can select to automatically display a "Stop" button at the top of the WebServices interface once you launched a makecall. By clicking this button you will cut the ongoing conversation for both phones. Note that this button is not cancelling a delayed service or ringing phones. Do not click this button before both phones are in communication.

You can adjust the delay between your click and the real cut by using the parameter MAKECALL_STOP_DELAY.

Display the button to stop the ongoing conversation of makecall
makecall+

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKECALL+_DELAY = MAKECALL+_DELAY_CONF + MAKECALL+_DELAY_FORM

An additional delay NETWORK_A, NETWORK_B is depending on the location of the phone receiving the call and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

You can select the maximum duration of the ring with the parameter MAKECALL+_RING_MAX_A, MAKECALL+_RING_MAX_B.

You can select the maximum duration of the first minute of the conversation with the parameter MAKECALL+_SPEAK_MAX_A, MAKECALL+_SPEAK_MAX_B. For makecall+ this parameter applies only if you select a duration of 1 minute in the launching form. If you select a duration of 2 to 10 minutes in the form, the parameter in the below table has no effect.

There are 2 types of makecall+, either sequential or simultaneous. The sequential one is trigerring the call to the second phone after the first phone has picked up. The simultaneous one is trigerring both calls at same time.


Sequential makecall+

makecallplus_sequential_timing

Simultaneuous makecall+

makecallplus_simultaneous_timing
Parameters (in seconds)MinStdMaxValue
MAKECALL+_DELAY_CONF0059
MAKECALL+_RING_MAX_A13030
MAKECALL+_RING_MAX_B13030
MAKECALL+_SPEAK_MAX_A15959
MAKECALL+_SPEAK_MAX_B15959
MAKECALL+_STOP_DELAY0059

You can select to automatically display a "Stop" button at the top of the WebServices interface once you launched a makecall+. By clicking this button you will cut the ongoing conversation for both phones. Note that this button is not cancelling a delayed service or ringing phones. Do not click this button before both phones are in communication.

You can adjust the delay between your click and the real cut by using the parameter MAKECALL+_STOP_DELAY.

Display the button to stop the ongoing conversation of makecall+
makesms

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKESMS_DELAY = MAKESMS_DELAY_CONF + MAKESMS_DELAY_FORM

An additional delay NETWORK is depending on the location of the phone receiving the message and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

makesms_timing
Parameters (in seconds)MinStdMaxValue
MAKESMS_DELAY_CONF0059
makesms+

The service is trigerred after a configurable delay composed of the delay configured here (in seconds) added to the delay selected in the form (in minutes).

MAKESMS+_DELAY = MAKESMS+_DELAY_CONF + MAKESMS+_DELAY_FORM

An additional delay NETWORK is depending on the location of the phone receiving the message and the corresponding infrastructure of its service provider. This delay is not controllable but usually between 2 and 6 seconds.

makesmsplus_timing
Parameters (in seconds)MinStdMaxValue
MAKESMS+_DELAY_CONF0059
Second message 5 minutes after the initial message
The configuration of parameters is reserved to experienced members who have reached cumulated payments amounting 20 EUR.